- Push to Connect
- Press to release
- 5' & 10' Watering Tubes
- Tubing Pre-Drilled
- Standard Kits or
- Design Your Own
Standard Kits
Standard kits come as "Rows". A basic row is 20 feet long and consists of two 10 foot watering tubes connected by two unions, terminated with an end cap. A hose connector and a 12 inch tube for it completes the kit.
A double row consists of two basic rows connected together with an 18 inch tube. Each additional row is similar.
The water pressure needs to be low, and the watering tube hole to length ratio is such that the water flows evenly thoughout the entire length. There is zero water loss except by evaporation and if covered by a mulch evaporation is minimized.
Design Your Own
All parts—connectors and tubing—can be ordered in any quantities. Tubing can be cut by any means and reused. Tubing holes can be added to customize water flow to suit your garden.
Assembly
Installing a kit could not be easier: Simply lay the parts out and push them together. The connectors have collects to hold the tubes in place so the entire assembly can be moved about. To remove a tube the connector's collet is held and the tube pulled out. Clean up is with water and everything easily stores away for winter.
Patent Pending